[SOLVED] can't see the player
Moderator: Gurus
[SOLVED] can't see the player
i just downloaded mediamonkey, and the 'player' box was there, but i must have hit something, because now i can't see it anymore. i tried going to View, and then selecting Player, but i still can't see it. i'm not sure what else to try.
-
- Posts: 14163
- Joined: Sat Oct 25, 2003 7:57 am
- Location: (Texas)
- Contact:
look where the player was.
you might have shrunk it down to the min. size just like you can with winamp.
you might have the player behind the taskbar which is why it does not show.
right click on the taskbar and click on properties then on that panel un check the option that says always on top.
now close that panel and start monkey or click on it again if monkey was already up and you could see the playlists.
now monkey should be in front of the task bar. look and see if the player shrink button was hit and the small slim line player is showing. if so then just click on the maxumize button to get the player large again..
now close monkey and go back to the desktop now right click on the task bar and go to its properties again. and re check the always on top option.
now go back to the desktop. and start monkey up again. it sould load to the size just above the taskbar.
and you should see the player.
however if the above was not the problem then you might need to do a bug report for jiri or rusty.
if that was not the error you can also tell us more details of how you got your options set up for media monkey.
we might be able to help that way.
you might have shrunk it down to the min. size just like you can with winamp.
you might have the player behind the taskbar which is why it does not show.
right click on the taskbar and click on properties then on that panel un check the option that says always on top.
now close that panel and start monkey or click on it again if monkey was already up and you could see the playlists.
now monkey should be in front of the task bar. look and see if the player shrink button was hit and the small slim line player is showing. if so then just click on the maxumize button to get the player large again..
now close monkey and go back to the desktop now right click on the task bar and go to its properties again. and re check the always on top option.
now go back to the desktop. and start monkey up again. it sould load to the size just above the taskbar.
and you should see the player.
however if the above was not the problem then you might need to do a bug report for jiri or rusty.
if that was not the error you can also tell us more details of how you got your options set up for media monkey.
we might be able to help that way.
roving cowboy / keith hall. My skins http://www.mediamonkey.com/forum/viewto ... =9&t=16724 for some help check on Monkey's helpful messages at http://www.mediamonkey.com/forum/viewto ... 4008#44008 MY SYSTEMS.1.Jukebox WinXp pro sp 3 version 3.5 gigabyte mb. 281 GHz amd athlon x2 240 built by me.) 2.WinXP pro sp3, vers 2.5.5 and vers 3.5 backup storage, shuttle 32a mb,734 MHz amd athlon put together by me.) 3.Dell demension, winxp pro sp3, mm3.5 spare jukebox.) 4.WinXp pro sp3, vers 3.5, dad's computer bought from computer store. )5. Samsung Galaxy A51 5G Android ) 6. amd a8-5600 apu 3.60ghz mm version 4 windows 7 pro bought from computer store.
For people with the same problem:
Cheers
Steegy
- Close MediaMonkey
- Open MediaMonkey's configuration file (normally "MediaMonkey.ini" in folder "My Documents\My Music\MediaMonkey")
- Locate the category [Appearance]
- Set the values as follows:
Code: Select all
PlayerPosition=3 PlayerSticky=0 PlayerVisible=1
- You can normally just delete the above 3 lines, to have the same effect.
- The problem can also be fixed if you delete the following registry key: HKEY_CURRENT_USER\Software\Songs-DB\Interface\Toolbars\TBXWinAmpSkin
Cheers
Steegy
Extensions: ExternalTools, ExtractFields, SongPreviewer, LinkedTracks, CleanImport, and some other scripts (Need Help with Addons > List of All Scripts).
Re: can't see the player
Another fix that worked for me to restore the miniplayer that was positioned off screen. Stop MM. From within the INI file, in the [FloatPlayer] section, delete:
Width=x
Height=x
Cheers!
-S
Width=x
Height=x
Cheers!
-S
Re: can't see the player
I read this (old) thread, and did the edits to Mediamoney.ini best I could but still no Player visible. The items in this thread no longer correspond to those in the ini file.
In short, If I select View | Player, unselect, and re-select Player, nothing changes in the Mediamonkey window. No Player controls. I cannot remember how I managed to remove the player, but it would be good to know.
Any ideas greatly welcomed. I am using v4.1.20.1864 on Win10. Any ideas?
In short, If I select View | Player, unselect, and re-select Player, nothing changes in the Mediamonkey window. No Player controls. I cannot remember how I managed to remove the player, but it would be good to know.
Any ideas greatly welcomed. I am using v4.1.20.1864 on Win10. Any ideas?
Manager, Blatant Fabrications Pty Ltd
Re: can't see the player
You can try an interface reset: http://www.mediamonkey.com/support/inde ... o-defaults
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
-
- Posts: 14163
- Joined: Sat Oct 25, 2003 7:57 am
- Location: (Texas)
- Contact:
Re: can't see the player
I didn't get the ini edits to work all the time either. Did you put the ini back to normal and try the sliding around of the player windows as I said above? If that still don't work then an over install of media monkey should just replace the messed up or missing files, but first back up the media monkey folder incase as a safty net
roving cowboy / keith hall. My skins http://www.mediamonkey.com/forum/viewto ... =9&t=16724 for some help check on Monkey's helpful messages at http://www.mediamonkey.com/forum/viewto ... 4008#44008 MY SYSTEMS.1.Jukebox WinXp pro sp 3 version 3.5 gigabyte mb. 281 GHz amd athlon x2 240 built by me.) 2.WinXP pro sp3, vers 2.5.5 and vers 3.5 backup storage, shuttle 32a mb,734 MHz amd athlon put together by me.) 3.Dell demension, winxp pro sp3, mm3.5 spare jukebox.) 4.WinXp pro sp3, vers 3.5, dad's computer bought from computer store. )5. Samsung Galaxy A51 5G Android ) 6. amd a8-5600 apu 3.60ghz mm version 4 windows 7 pro bought from computer store.
Re: can't see the player
The registry delete worked a treat! BTW, I found it best to manually navigate to the interface line rather than search.Lowlander wrote:You can try an interface reset: http://www.mediamonkey.com/support/inde ... o-defaults
We now have a Player back again! Thank you
Manager, Blatant Fabrications Pty Ltd
-
- Posts: 1
- Joined: Sun Dec 10, 2023 6:20 am
Re: [SOLVED] can't see the player
I fixed it by enabling the bottom panel in view.