Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Moderator: Gurus
Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Updating in place from MM 5.0.2.2532 (portable) to 5.0.3.2627 (portable) hangs at the splash screen for me. I've tried now with both the regular and debug versions. When I revert the portable install folder back to v5.0.2.2532 via shadowcopies the old version runs properly again. I've tried upgrading several times and I've tried removing any custom scripts from the folder before upgrading.
Clean install to new portable folder works.
Clean install to new portable folder works.
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Can you please capture the failure to open in a debug log (step 4b) and attach the log to a Support Ticket: https://www.mediamonkey.com/forum/viewtopic.php?t=86639
This will help a developer analyze why this fails for you.
Can you copy your database file to the clean copy and does it then open successfully?
This will help a developer analyze why this fails for you.
Can you copy your database file to the clean copy and does it then open successfully?
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Same problem for me
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Hi, could you please try whether running MM5 using MediaMonkey_NoGPU.bat solves the issue?
See item 1.2. here: https://www.mediamonkey.com/support/kno ... wont-open/
See item 1.2. here: https://www.mediamonkey.com/support/kno ... wont-open/
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Thank you, yes MediaMonkey_NoGPU.bat runs properly after upgrade.
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Hello,
MediaMonkey_NoGPU.bat doesn't solve the problem for me.
I sent the crash report by cliking on "Send" on the crash screen, but I'm not sure that the report is properly sent.
See crash with ID 8076
Do you have a possibility to check this ?
I had to downgrade to 5.0.2.2531
MediaMonkey_NoGPU.bat doesn't solve the problem for me.
I sent the crash report by cliking on "Send" on the crash screen, but I'm not sure that the report is properly sent.
See crash with ID 8076
Do you have a possibility to check this ?
I had to downgrade to 5.0.2.2531
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
This may or may not be related to the noGPU workaround but v5.0.3.2627 (portable) crashes every ~5 hours or so and has to be restarted. I've had to revert to v5.0.2.2532 for now to mitigate the issue.
If I get the urge I will reinstall the newest debug version and dump the debug logs and capture a screenshot of the issue.
If I get the urge I will reinstall the newest debug version and dump the debug logs and capture a screenshot of the issue.
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
A debug log would be really helpful to help resolve this.
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
I've the same problem here.
Launching MM5 through .bat file solves the problem.
This should be solved another way of using this workaround.
Moreover, the justification here https://www.mediamonkey.com/support/kno ... wont-open/
is not acceptable. Why powerful GPU should be used for a music program ???
In another way, I found that you developped a x86 version only. Is there a reason not developing a 64-bits version ?
Thanks for your support
Launching MM5 through .bat file solves the problem.
This should be solved another way of using this workaround.
Moreover, the justification here https://www.mediamonkey.com/support/kno ... wont-open/
is not acceptable. Why powerful GPU should be used for a music program ???
In another way, I found that you developped a x86 version only. Is there a reason not developing a 64-bits version ?
Thanks for your support
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
GPU rendering is used for the interface. 64 bits is not going to give massive performance, but will require lots of extra development. It may come in the future.
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Launching MM5 thru BAT file and if it is working usually means Driver is outdated Windows and chromium Policy and most likely lost WHQL certificate or some models were crashed Chromium so many times so they are added to Black list source code.
Please, may I suggest you to download TechPowerUp GPU-Z and create screenshot (app have screenshot button top right) and post it here in reply (see my signature how). I'll try to help you as much as I can.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
-
- Posts: 2
- Joined: Mon Nov 02, 2009 8:08 am
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Same problem here...... only way to get it to start is by running the MediaMonley_NOGPU.bat file each time.
This bat file is supposed to be a one time run thing....but doesnt solve the problem....still hangs at startup.
This bat file is supposed to be a one time run thing....but doesnt solve the problem....still hangs at startup.
-
- Posts: 2
- Joined: Mon Nov 02, 2009 8:08 am
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
Which Build (Help > About) are you using?
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Re: Upgrading from 5.0.2.2532 to 5.0.3.2627 hangs at splash screen
What GPU you have?deancollins wrote: ↑Mon Oct 03, 2022 8:24 am Same problem here...... only way to get it to start is by running the MediaMonley_NOGPU.bat file each time.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts