SERVICE installed, but not working
Moderator: Gurus
SERVICE installed, but not working
win10-64bit 1803, windows firewall deaktivated, no other firewall runnig.
MMW 4.2.21.1875
MM service installed without errors.
I boot my PC, under task manager 2 "background processes" are started:
MMservice.exe
MM (32 bit)
But in MMA/upnp and bubbleupnp no MM server appears.
As soon as i start MMW, "MM server" appears in both MMA & bubbleupnp.
When i close MMW, "MM server" disappears and does not reappear even after a longer time of serveral minutes, not in MMA and not in BubbleUpnp. Also restarting MMA/bubbleupnp does not solve that.
---
What's strange: in both bubbleupnp and MMA the "MMW player" on the PC appears as a renderer when i want to cast a song. Which of course cannot be played because MM on the PC is not running.
MMW 4.2.21.1875
MM service installed without errors.
I boot my PC, under task manager 2 "background processes" are started:
MMservice.exe
MM (32 bit)
But in MMA/upnp and bubbleupnp no MM server appears.
As soon as i start MMW, "MM server" appears in both MMA & bubbleupnp.
When i close MMW, "MM server" disappears and does not reappear even after a longer time of serveral minutes, not in MMA and not in BubbleUpnp. Also restarting MMA/bubbleupnp does not solve that.
---
What's strange: in both bubbleupnp and MMA the "MMW player" on the PC appears as a renderer when i want to cast a song. Which of course cannot be played because MM on the PC is not running.
Re: SERVICE installed, but not working
Did you install the Service as the same Windows User MM itself is running as? The Service uses the MM settings, thus it needs to run as the same Windows User to use your Media Server settings.
Do you have a DLNA client on the same PC to check if it sees the MediaMonkey Server (maybe Firewall is blocking Service)?
Do you have a DLNA client on the same PC to check if it sees the MediaMonkey Server (maybe Firewall is blocking Service)?
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Re: SERVICE installed, but not working
Thanks.
On my PC i am the only 1 user logged in as admin, there are no others.
The VLC media player on my PC is a dlna client and it behaves the same way under its upnp sources:
- MMW startet: MM server and its shared content visible
- MMW closed: MM server disappears and does not reappear (but as said above: under task manager "MMservice.exe + MM (32bit)" are still there
But the internal windows 10 media server is always visible on my PC and on android.
On my PC i am the only 1 user logged in as admin, there are no others.
The VLC media player on my PC is a dlna client and it behaves the same way under its upnp sources:
- MMW startet: MM server and its shared content visible
- MMW closed: MM server disappears and does not reappear (but as said above: under task manager "MMservice.exe + MM (32bit)" are still there
But the internal windows 10 media server is always visible on my PC and on android.
Re: SERVICE installed, but not working
Yes, options/leveling/level playback volume to: enabled.
But it does not seem to matter for the server issue, it remains the same, if enabled or not.
you can disable the verification to stop the window? Sorry, i do not understand. What do you mean?
But it does not seem to matter for the server issue, it remains the same, if enabled or not.
you can disable the verification to stop the window? Sorry, i do not understand. What do you mean?
Re: SERVICE installed, but not working
Hi,
Can you try this?
1. Uninstall service
2. Make sure it is not listed under windows services
3. Make sure that MMW server is still seen when started
4. Restart Windows
5. Start MMW
6. Install service
7. Check if service is seen now
8. Restart Windows
if that do not help repeat all but as step 5a. Change MMW Server Port
Let us know the result.
Can you try this?
1. Uninstall service
2. Make sure it is not listed under windows services
3. Make sure that MMW server is still seen when started
4. Restart Windows
5. Start MMW
6. Install service
7. Check if service is seen now
8. Restart Windows
if that do not help repeat all but as step 5a. Change MMW Server Port
Let us know the result.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Re: SERVICE installed, but not working
@peke: Thanks, but still no success.
Port was at: 53951, changed to: 5000 & 6000.
When MMW started, under windows/services the MMservice is "stopped": now MMserver is visible on upnp.
When MMW closed, under windows/services the MMservice changes to "started/running": but MMserver does NOT appear.
Port was at: 53951, changed to: 5000 & 6000.
When MMW started, under windows/services the MMservice is "stopped": now MMserver is visible on upnp.
When MMW closed, under windows/services the MMservice changes to "started/running": but MMserver does NOT appear.
Re: SERVICE installed, but not working
Hi,
Can you please open support ticket and supply log file as described here viewtopic.php?f=20&t=69 so that I can analyze and see what to do next.
I had similar issue two days ago when I tried to setup WiFi sync on new phone, but after PC restart when I wanted to make logs it worked
Can you please open support ticket and supply log file as described here viewtopic.php?f=20&t=69 so that I can analyze and see what to do next.
I had similar issue two days ago when I tried to setup WiFi sync on new phone, but after PC restart when I wanted to make logs it worked
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Re: SERVICE installed, but not working
I found a workaround, it may actually show what the issue may be.
I had the same issue, just as a test I set up a SECOND UPnP MediaMonkey server different name, different port.
I then installed the UPnP server as a service...
All of a sudden the FIRST UPnP MediaMonkey server appeared, even when the app wasn't loaded.
There was no sign of the SECOND in the UPnP server list.
I had the same issue, just as a test I set up a SECOND UPnP MediaMonkey server different name, different port.
I then installed the UPnP server as a service...
All of a sudden the FIRST UPnP MediaMonkey server appeared, even when the app wasn't loaded.
There was no sign of the SECOND in the UPnP server list.
Last edited by Wullail on Tue Jul 31, 2018 5:52 am, edited 1 time in total.
Re: SERVICE installed, but not working
@Wullail:
Yes, there seems to be something in it what you describe: on my MMA even both servers appear sometimes, when MMW closed and on service only.
But can you actually browse the content of the server when it appears with only the service running?
After some 1-2 min. of "connecting..." i get only: connection failed
Yes, there seems to be something in it what you describe: on my MMA even both servers appear sometimes, when MMW closed and on service only.
But can you actually browse the content of the server when it appears with only the service running?
After some 1-2 min. of "connecting..." i get only: connection failed
Last edited by surfer on Tue Jul 31, 2018 6:12 am, edited 1 time in total.
Re: SERVICE installed, but not working
Unfortunately not, connection failed also....so there's more going on.
I did notice though when installed as a service and close the app, if you look at the task manager list.
THIS is what it shows in the background processes list (for some reason)
MediaMonkey (32 bit)
Mediamonkey64helper.exe
Mediamonkeyservice.exe (32 bit)
I don't know if it should be still be showing MediaMonkey (32 bit) there.
When re-running the app the media scanning for new media (mines set to re-scan on startup) takes AGES.
If I end task on the MediaMonkey (32 bit) the scanning for new media then works as quickly as usual.
I did notice though when installed as a service and close the app, if you look at the task manager list.
THIS is what it shows in the background processes list (for some reason)
MediaMonkey (32 bit)
Mediamonkey64helper.exe
Mediamonkeyservice.exe (32 bit)
I don't know if it should be still be showing MediaMonkey (32 bit) there.
When re-running the app the media scanning for new media (mines set to re-scan on startup) takes AGES.
If I end task on the MediaMonkey (32 bit) the scanning for new media then works as quickly as usual.
Re: SERVICE installed, but not working
Conection failed when on "service" only: so this needs to be resolved, i'm not the only one
Scanning files:
You do not need to scan files on each start-up.
My setting: options / library / file monitor / (define folders to scan) scan continuously (but NOT on start-up!).
When you add new files MM has to be running, then all new files will be added to library.
Scanning files:
You do not need to scan files on each start-up.
My setting: options / library / file monitor / (define folders to scan) scan continuously (but NOT on start-up!).
When you add new files MM has to be running, then all new files will be added to library.
Re: SERVICE installed, but not working
I kept trying, in the end, I gave up and just left MM running in the background, it was more trouble than it was worth for now.surfer wrote: ↑Tue Jul 31, 2018 6:21 am Conection failed when on "service" only: so this needs to be resolved, i'm not the only one
Scanning files:
You do not need to scan files on each start-up.
My setting: options / library / file monitor / (define folders to scan) scan continuously (but NOT on start-up!).
When you add new files MM has to be running, then all new files will be added to library.