HiRes Files [#18340 #18537]

Get answers about the current version of MediaMonkey 5

Moderator: Gurus

AnnieBody
Posts: 7
Joined: Thu Sep 23, 2021 5:57 am

HiRes Files [#18340 #18537]

Post by AnnieBody »

I want to use MediaMonkey to stream my music to my HiFi.
I notice that it transcodes some files which is definitely not want I want to do.
Is there a way to play DSD/DSF files at native resolution instead of transcoding?
Regards and thanks
Lowlander
Posts: 56465
Joined: Sat Sep 06, 2003 5:53 pm
Location: MediaMonkey 5

Re: HiRes Files

Post by Lowlander »

That's set in the Media Server settings, you may need to adjust Support Formats: https://www.mediamonkey.com/wiki/WebHel ... .28DLNA.29

Note that sometimes devices have limited support over DLNA, while supporting more formats for files on USB drives.
AnnieBody
Posts: 7
Joined: Thu Sep 23, 2021 5:57 am

Re: HiRes Files

Post by AnnieBody »

The supported formats DSD or DSF files in the 'Auto Conversions' tab do not list DSD nor DSF.
Am I right in assuming these are not supported?
I have all the 'supported Audio Formats' checked.
Also, with all the 'Auto Conversions' options unchecked am I right in assuming no transcoding will take place?
Lowlander
Posts: 56465
Joined: Sat Sep 06, 2003 5:53 pm
Location: MediaMonkey 5

Re: HiRes Files

Post by Lowlander »

AnnieBody
Posts: 7
Joined: Thu Sep 23, 2021 5:57 am

Re: HiRes Files [#18340]

Post by AnnieBody »

Wow! Thanks!
Positive feedback! What a refreshing change! :D
I previously tried MusicBee but got fed up with the abuse and sarcasm whenever I asked for help!

Next step is getting it to stream using Android...
MMuser78
Posts: 18
Joined: Mon Oct 08, 2018 4:26 am

Re: HiRes Files [#18340]

Post by MMuser78 »

Is it possible to play .dsf DSD files without auto-conversion to PCM 24/44 via Mediamonkey without using a DLNA device (.i.e. just MM5+USB DAC)? I can't get it to work despite using the ASIO output plugin.
Software: 5.0.2.2511 Beta / MM_Codec_Pack_Trial_3.0.6
Peke
Posts: 17446
Joined: Tue Jun 10, 2003 7:21 pm
Location: Earth
Contact:

Re: HiRes Files [#18340]

Post by Peke »

Hi,
MMuser78 wrote: Sat Oct 23, 2021 6:19 am I can't get it to work despite using the ASIO output plugin.
ASIO plugin as never officially supported in MM, Even if it works I would suggest that you use WASAPI in Exclusive Mode if you want Bit perfect playback.

JUST tested and ASIO plugin do not support BIT Streaming required for DSF playback.

NOTE: I have done extensive testing of Outputs not long time ago and WASAPI even in Shared mode proved best supported solution on any equipment less than 5k-10k USD in which case a specific Audio Player is prefered due the fact it is optimized/calibrated for use with such equipment in which PC is only used as File reader and equipment decode and do the rest.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
Image
Image
Image
How to attach PICTURE/SCREENSHOTS to forum posts
MMuser78
Posts: 18
Joined: Mon Oct 08, 2018 4:26 am

Re: HiRes Files [#18340]

Post by MMuser78 »

Peke wrote: Sun Oct 24, 2021 6:42 pmASIO plugin as never officially supported in MM, Even if it works I would suggest that you use WASAPI in Exclusive Mode if you want Bit perfect playback.
Many thanks for your reply. I tried the WASAPI exclusive mode (options: use original format of track/automatic choice of format per track) and also played around with the other options given, unfortunately the same result: Mediamonkey 5 auto-converts DSD to PCM 24/44. Is it possible that Mediamonkey isn't able to play .dsf DSD files natively? I'm asking because properties->details of .dsf files always shows 24/44 in MM5.

Software: 5.0.2.2513 Beta / MM_Codec_Pack_Trial_3.0.6
Peke
Posts: 17446
Joined: Tue Jun 10, 2003 7:21 pm
Location: Earth
Contact:

Re: HiRes Files [#18340]

Post by Peke »

Hi,
MMuser78 wrote: Sat Oct 30, 2021 10:51 am
Peke wrote: Sun Oct 24, 2021 6:42 pmASIO plugin as never officially supported in MM, Even if it works I would suggest that you use WASAPI in Exclusive Mode if you want Bit perfect playback.
Many thanks for your reply. I tried the WASAPI exclusive mode (options: use original format of track/automatic choice of format per track) and also played around with the other options given, unfortunately the same result: Mediamonkey 5 auto-converts DSD to PCM 24/44. Is it possible that Mediamonkey isn't able to play .dsf DSD files natively? I'm asking because properties->details of .dsf files always shows 24/44 in MM5.

Software: 5.0.2.2513 Beta / MM_Codec_Pack_Trial_3.0.6
DSF can't be auto set by DAC, mine do not support 1 / 128 (or 256/512), so I set it to 24/192 and let my DAC DSP do the UP/DOWN scaling.

My guess is that 24/44.1 is safe bet for DAC.

More info on https://en.wikipedia.org/wiki/Direct_St ... SD_vs._PCM
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
Image
Image
Image
How to attach PICTURE/SCREENSHOTS to forum posts
MMuser78
Posts: 18
Joined: Mon Oct 08, 2018 4:26 am

Re: HiRes Files [#18340]

Post by MMuser78 »

Peke wrote: Sun Oct 31, 2021 9:29 amDSF can't be auto set by DAC, mine do not support 1 / 128 (or 256/512), so I set it to 24/192 and let my DAC DSP do the UP/DOWN scaling.
My DAC supports native DSD up to DSD128 (I only have DSD64 files anyway) but unfortunately MM5 doesn't. Are there any plans to change this? I'd prefer native output of DSD.
Besides that, DSD64 is comparable to PCM 24/88.2, so if there has to be an auto-conversion not manageable by the user - as is the case in the current MediaMonkey version - I wouldn't use PCM 24/44.1 but PCM 24/88.2. Unfortunately, chosing this in the output settigs currently makes no sense as it just triggers a second conversion following the standard (not manageable) playback conversion from DSD to 24/44.1.
Peke
Posts: 17446
Joined: Tue Jun 10, 2003 7:21 pm
Location: Earth
Contact:

Re: HiRes Files [#18340]

Post by Peke »

MMuser78 wrote: Sun Oct 31, 2021 11:35 am
Peke wrote: Sun Oct 31, 2021 9:29 amDSF can't be auto set by DAC, mine do not support 1 / 128 (or 256/512), so I set it to 24/192 and let my DAC DSP do the UP/DOWN scaling.
My DAC supports native DSD up to DSD128 (I only have DSD64 files anyway) but unfortunately MM5 doesn't. Are there any plans to change this? I'd prefer native output of DSD.
Besides that, DSD64 is comparable to PCM 24/88.2, so if there has to be an auto-conversion not manageable by the user - as is the case in the current MediaMonkey version - I wouldn't use PCM 24/44.1 but PCM 24/88.2. Unfortunately, chosing this in the output settigs currently makes no sense as it just triggers a second conversion following the standard (not manageable) playback conversion from DSD to 24/44.1.
Hmmm, well I guess this needs to be investigated, if there is possibility to BIT stream DSD to output in RAW format. But it will not be that fast, because such change is classified as very high risk of regressions and most likely will make problems with other formats.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
Image
Image
Image
How to attach PICTURE/SCREENSHOTS to forum posts
MiPi
Posts: 867
Joined: Tue Aug 18, 2009 2:56 pm
Location: Czech Republic
Contact:

Re: HiRes Files [#18340]

Post by MiPi »

We could probably use conversion to 88200Hz. Tracked as https://www.ventismedia.com/mantis/view.php?id=18537
MMuser78
Posts: 18
Joined: Mon Oct 08, 2018 4:26 am

Re: HiRes Files [#18340 #18537]

Post by MMuser78 »

Many thanks, that works for me in the latest beta version and is a big step in the right direction.
Post Reply