by Dancer » Sun Apr 30, 2023 4:50 am
Thank you very much, @Peke, for your comment.
In this case, I no longer have a LAN connection. Instead, a USB WiFi adapter (TP-Link TL-WN722N), because the PC has no internal network card. The IP address is also probably from this adapter.
`ifconfig` Output:
Code: Select all
[code]rainer@rainer-OptiPlex:~$ ifconfig enp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 54:bf:64:94:ae:5d txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local loop) RX packets 6768 bytes 524394 (524.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 6768 bytes 524394 (524.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlx14cc2013a10a: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.97.190 netmask 255.255.255.0 broadcast 192.168.97.255 inet6 fe80::ddae:1c29:83c1:8f90 prefixlen 64 scopeid 0x20<link> inet6 2a02:3030:40a:26df:9a39:b16b:5fa9:bd26 prefixlen 64 scopeid 0x0<global> ether 14:cc:20:13:a1:0a txqueuelen 1000 (Ethernet) RX packets 385 bytes 137311 (137.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 491 bytes 72296 (72.2 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Should I change something here? If yes, how?
Thank you very much, @Peke, for your comment.
In this case, I no longer have a LAN connection. Instead, a USB WiFi adapter (TP-Link TL-WN722N), because the PC has no internal network card. The IP address is also probably from this adapter.
`ifconfig` Output:
[code][code]rainer@rainer-OptiPlex:~$ ifconfig enp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 54:bf:64:94:ae:5d txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local loop) RX packets 6768 bytes 524394 (524.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 6768 bytes 524394 (524.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlx14cc2013a10a: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.97.190 netmask 255.255.255.0 broadcast 192.168.97.255 inet6 fe80::ddae:1c29:83c1:8f90 prefixlen 64 scopeid 0x20<link> inet6 2a02:3030:40a:26df:9a39:b16b:5fa9:bd26 prefixlen 64 scopeid 0x0<global> ether 14:cc:20:13:a1:0a txqueuelen 1000 (Ethernet) RX packets 385 bytes 137311 (137.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 491 bytes 72296 (72.2 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [/code]
Should I change something here? If yes, how?