Is it possible at all like this?
When I add a new server with automatic IP this message appears in browser:
Code: Select all
192.168.176.190 has rejected the connection.
Moderator: Gurus
Code: Select all
192.168.176.190 has rejected the connection.
Code: Select all
[code]rainer@rainer-OptiPlex:~$ ifconfig enp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 54:bf:64:94:ae:5d txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local loop) RX packets 6768 bytes 524394 (524.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 6768 bytes 524394 (524.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlx14cc2013a10a: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.97.190 netmask 255.255.255.0 broadcast 192.168.97.255 inet6 fe80::ddae:1c29:83c1:8f90 prefixlen 64 scopeid 0x20<link> inet6 2a02:3030:40a:26df:9a39:b16b:5fa9:bd26 prefixlen 64 scopeid 0x0<global> ether 14:cc:20:13:a1:0a txqueuelen 1000 (Ethernet) RX packets 385 bytes 137311 (137.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 491 bytes 72296 (72.2 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Code: Select all
SSID: Redmi Note 11S
Protokoll: Wi-Fi 4 (802.11n)
Sicherheitstyp: WPA2-Personal
Netzfrequenzbereich: 2,4 GHz
Netzwerkkanal: 1
Verbindungsgeschwindigkeit (Empfang/Übertragung): 65/65 (Mbps)
IPv6-Adresse: 2a02:3030:412:6c4:b665:743e:9cb8:3f56
Verbindungslokale IPv6-Adresse: fe80::a373:e3ad:2a6:651d%3
IPv4-Adresse: 192.168.97.190
IPv4-DNS-Server: 192.168.97.226
Hersteller: TP-LINK
Beschreibung: TP-LINK 150Mbps Wireless Lite N Adapter
Treiberversion: 2.0.0.32
Physische Adresse (MAC): 14-CC-20-13-A1-0A