Clear Field 1.3 - Updated 26/07/2014
Yes you can, but this script will do it in the background so if you're clearing out a field (maybe a custom field because you've decided to use it for a different purpose) then you can run the script for your thousands and thousands of tracks without MM freezing whilst it does it. This is especially the case if you are writing to the tags as well. I'm not sure if this is still an issue in MM3 though.
It's also useful for clearing out fields (such as the Lyrics field) for which these is no checkbox and cannot be edited for multiple tracks at once.
It's also useful for clearing out fields (such as the Lyrics field) for which these is no checkbox and cannot be edited for multiple tracks at once.
Download my scripts at my own MediaMonkey fansite.
All the code for my website and scripts is safely backed up immediately and for free using Dropbox.
All the code for my website and scripts is safely backed up immediately and for free using Dropbox.
I had same question that Dreadlau had - not sure I see the benefit of this script (MM3 will process tracks in 'background' when update via properties). Limitation of this script is needing to know the field name as there is no drop down, limited to single field as compared to just using Properties where you can clear out multiple fields all at once (for example all 5 of the custom fields).trixmoto wrote:Yes you can, but this script will do it in the background so if you're clearing out a field (maybe a custom field because you've decided to use it for a different purpose) then you can run the script for your thousands and thousands of tracks without MM freezing whilst it does it. This is especially the case if you are writing to the tags as well. I'm not sure if this is still an issue in MM3 though.
It's also useful for clearing out fields (such as the Lyrics field) for which these is no checkbox and cannot be edited for multiple tracks at once.
I have found that your scripts trixmoto are usually quite useful. However other than having the ability to clear lyrics the toolset already in MM3 seems to be far superior in this case. I know the short answer is "fine, don't use it". However since you didn't know that MM3 will process Property updates in the background that was useful info for you. Now knowing that maybe you won't need to dedicate any more time to maintaining this -or- modify it so that it focuses only on those fields that Properties doesn't support for multiple tracks (such as lyrics). This should be a short list then that could be included in drop down list which then makes this much more user friendly tool.
This script was originally requested for clearing out the Lyrics field, but I decided to make it work for any field so that it was more flexible. I didn't create a dropdown list because then I'd have to maintain the list!
@Vyper - try Custom3 (without the space).
@Vyper - try Custom3 (without the space).
Download my scripts at my own MediaMonkey fansite.
All the code for my website and scripts is safely backed up immediately and for free using Dropbox.
All the code for my website and scripts is safely backed up immediately and for free using Dropbox.
a list of fields (properties) is available @ http://www.mediamonkey.com/wiki/index.php/SDBSongData however it may not be completely up to date with all the mm3 fields (I know it was missing custom4 and custom5 before I added them).
New script: Last.FM Node Now with DJ Mode!
Last.fm + MediaMonkey = Scrobbler DJ!
Tag with MusicBrainz ~ Get Album Art!
Tweak the Monkey! ~ My Scripts Page
Last.fm + MediaMonkey = Scrobbler DJ!
Tag with MusicBrainz ~ Get Album Art!
Tweak the Monkey! ~ My Scripts Page
Re: Clear Field 1.1 [MM2+3]
I would just like to say a thank you trixmoto, for this addon!
This is one of the reason why I use MediaMonkey!
It is really helpful and I do use it
Keep up the good work & Happy coding!
This is one of the reason why I use MediaMonkey!
It is really helpful and I do use it
Keep up the good work & Happy coding!
-
- Posts: 622
- Joined: Wed Oct 25, 2006 12:53 pm
Re: Clear Field 1.1 [MM2+3]
Me toosommo wrote:I would just like to say a thank you trixmoto, for this addon
I have just found a load of rubbish in the Lyrics field and thanks to this script it was cleared up without any difficulty.
Thanks also to spacefish for pointing me in this direction
Thanks again folks,
MediaMonkey user since 2006
-
- Posts: 455
- Joined: Mon Aug 27, 2007 2:34 am
Re:
Thanks for this, Trixmoto. I cleared the garbage from Custom5 for 1200 tracks. It works beautifully exactly as described. MediaMonkey on its own just cannot handle tagging more than about 300 tracks at once. This script solves that and is great.
If I want to lower the rating of 3000 tracks, I have to do 12 or so batches of 270-ish tracks. It's really annoying! Even then, MediaMonkey takes ages to get going and gives the impression that it is not happy at all until it finally unlocks and sets off tagging.
It's the tortoise and the hare. This script chugs away reliably and you can carry on doing other things. MediaMonkey is fast once it gets going but getting going seems a bit too 'beefed up'.
I know part of the issue is my computer but it's not ancient.
I've always thought this was a very good explanation:Can't you do the same using properties, clearing the field and ticking the box?
Can anyone explain why MediaMonkey has to behave the way it does? It kind of seems to throw, hurl, all the tracks at itself at once, causing it to go into seizure at the initial stage. It's fine once it gets going. If it gets going. Yet this script, and RegEx Find & Replace etc. can happily process thousands of tracks. It may be slower but it's effective.trixmoto wrote:Yes you can, but this script will do it in the background so if you're clearing out a field (maybe a custom field because you've decided to use it for a different purpose) then you can run the script for your thousands and thousands of tracks without MM freezing whilst it does it. This is especially the case if you are writing to the tags as well. I'm not sure if this is still an issue in MM3 though.
It's also useful for clearing out fields (such as the Lyrics field) for which these is no checkbox and cannot be edited for multiple tracks at once.
If I want to lower the rating of 3000 tracks, I have to do 12 or so batches of 270-ish tracks. It's really annoying! Even then, MediaMonkey takes ages to get going and gives the impression that it is not happy at all until it finally unlocks and sets off tagging.
It's the tortoise and the hare. This script chugs away reliably and you can carry on doing other things. MediaMonkey is fast once it gets going but getting going seems a bit too 'beefed up'.
I know part of the issue is my computer but it's not ancient.
MMW 4.1.9.1764|MMA 1.1.3.0482|Android 5.0|Win 8.1 64 bit
Re: Clear Field 1.1 [MM2+3]
I wonder is it possible to modify this script to clean same content from selected fields and all other fields that contain exact same info for example Clean "DJ Promo Track" from Encoder and also from Copyright and Comment with only one selection?
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
How to attach PICTURE/SCREENSHOTS to forum posts
-
- Posts: 374
- Joined: Sat Feb 02, 2008 1:09 pm
- Location: Texas
Re: Clear Field 1.1 [MM2+3]
Wouldn't that be ZvezdanD's RegExp script?Peke wrote:I wonder is it possible to modify this script to clean same content from selected fields and all other fields that contain exact same info for example Clean "DJ Promo Track" from Encoder and also from Copyright and Comment with only one selection?
Re: Clear Field 1.1 [MM2+3]
You are right, it was really slow. I have just fixed a small problem there and the action of updating properties in Library is much faster now (although it can still take some time to process on really large groups of tracks).If I want to lower the rating of 3000 tracks, I have to do 12 or so batches of 270-ish tracks. It's really annoying! Even then, MediaMonkey takes ages to get going and gives the impression that it is not happy at all until it finally unlocks and sets off tagging.
Jiri