by nordicmusic » Sat Jan 18, 2020 8:48 am
Good morning Lowlander
Thanks for being patient with me.
The Device Profiles have a checkmark on the one I prefer.
"Scan as soon as the device is connected" was not checked". But I think this is not a problem as I can start the synchronization from the phone/MMA?
After running the download/synchronizing during the night it has managed to download 2068 tracks. That's mean that the download have stopped. Probably because I turned off the wi-fi. The USB cable was connected all the time. And YES, the USB is connected in the MTP mode.
Another issue is that all 2068 tracks have got the same album art, witch is not correct. There should be around 140 different album art. What have happened? How can this be corrected?
It looks like the transfer of the files is done via wi-fi, not by the USB cable.
Using USB cable depend on the UPnP-settings?
When I tap on the UPnP-symbol on MMA I get 3 servers on the screen: My PC (IP address 192.168.1.81), my 2nd PC (IP address 192.168.1.229) and MediaMonkey Library (my PC-name) (IP address 192.168.1.81).
Tapping on the first two gives me: "Connection failed".
Tapping on the MM Library gives me access to my PC. I can tap on different choices and and go directly into different hard drives and into folders.
Holding the finger on the MM Library I got a new screen where I chose "Edit".
I then get a new screen "Add media server".
"Device destination" http:/192.168.1.81:22866/DeviceDescription_file.xml
Should something in the Device destination-description be changed???
Should DeviceDestination be replaced with something else???
It seams that I have missed some important instruction to get the USB cable connected and communicate between the MMA and MMW (between the device and PC).
On the phone I get the 3 normal choices; transfer picture, transfer files, charge the phone.
Transfer files gives me the information that file transfer will be done by USB cable. So I think the settings for USB cable is correctly (=MTP mode).
So to the conclusion: IF it is the UPnP that control the USB cable communication between the phone and PC then it looks like that the configuration of the UPnP is not correct.
PS! I can send screen shots from both phone and/or PC, if necessary.
regards
nordicmusic
Good morning Lowlander
Thanks for being patient with me.
The Device Profiles have a checkmark on the one I prefer.
"Scan as soon as the device is connected" was not checked". But I think this is not a problem as I can start the synchronization from the phone/MMA?
After running the download/synchronizing during the night it has managed to download 2068 tracks. That's mean that the download have stopped. Probably because I turned off the wi-fi. The USB cable was connected all the time. And YES, the USB is connected in the MTP mode.
Another issue is that all 2068 tracks have got the same album art, witch is not correct. There should be around 140 different album art. What have happened? How can this be corrected?
It looks like the transfer of the files is done via wi-fi, not by the USB cable.
Using USB cable depend on the UPnP-settings?
When I tap on the UPnP-symbol on MMA I get 3 servers on the screen: My PC (IP address 192.168.1.81), my 2nd PC (IP address 192.168.1.229) and MediaMonkey Library (my PC-name) (IP address 192.168.1.81).
Tapping on the first two gives me: "Connection failed".
Tapping on the MM Library gives me access to my PC. I can tap on different choices and and go directly into different hard drives and into folders.
Holding the finger on the MM Library I got a new screen where I chose "Edit".
I then get a new screen "Add media server".
"Device destination" http:/192.168.1.81:22866/DeviceDescription_file.xml
[b]Should something in the Device destination-description be changed???
Should DeviceDestination be replaced with something else??? [/b]
It seams that I have missed some important instruction to get the USB cable connected and communicate between the MMA and MMW (between the device and PC).
On the phone I get the 3 normal choices; transfer picture, transfer files, charge the phone.
Transfer files gives me the information that file transfer will be done by USB cable. So I think the settings for USB cable is correctly (=MTP mode).
So to the conclusion: IF it is the UPnP that control the USB cable communication between the phone and PC then it looks like that the configuration of the UPnP is not correct.
PS! I can send screen shots from both phone and/or PC, if necessary.
regards
nordicmusic